Wall sawing for structural openings, doorways and service penetrations, scanned first so the cut avoids what's actually behind the wall, not just what the drawings claim
Submitted before 2pm? Your quote comes back today.
Under Victoria's crystalline silica regulations, concrete cutting is classified as high-risk work — and builders carry chain-of-responsibility exposure for every subcontractor's dust. Engaging a compliant specialist isn't a nice-to-have; it's how you take the risk off your site.
The 0.05 mg/m³ respirable crystalline silica exposure standard becomes a hard Workplace Exposure Limit. Procurement teams are already asking for compliance evidence — our documentation answers it on the first request.
Wall sawing is a track-mounted, diamond-blade cut through vertical concrete and masonry — doorways, window openings, structural penetrations and full wall removals. Unlike a road saw, the track sits flush to the wall face and can cut in any direction, which is what makes it the right tool for openings rather than flat, horizontal runs.
Before any wall gets cut, the section is scanned for services — power, data, plumbing, and post-tensioned cable where it applies. Older Melbourne buildings are the highest-risk case: original drawings rarely match what's actually chased into the wall, and a missed service means a cut job becomes a repair job. Depth and reinforcement also decide blade spec; load-bearing walls get a different approach than a non-structural partition.
Every job runs the same sequence: scan the wall and confirm the opening, cut with wet suppression and slurry containment to stay inside WorkSafe silica limits, then hand the opening back clean and ready for the next trade. It's booked across builders and fit-out crews (new doorways, service penetrations, demolition openings), government and healthcare (occupied-building openings scheduled around operating hours), and services contractors (wall penetrations for plumbing, electrical and HVAC runs).
Email plans, markups or a description before 2pm. We quote from documents — you get your number the same business day.
We confirm an attendance window and supply SWMS and SRCP documentation before mobilisation — procurement-ready, no chasing.
Dust-suppressed cutting, slurry contained and removed, site handed back ready for the next trade. Your program never waits on us.
Occupied buildings, trading hours, live environments, procurement paperwork — the constraints that make generalists hesitate are the conditions we plan for.
Strip-outs, penetrations and slab openings across office, retail and warehouse projects — staged to your program, SWMS pack before mobilisation.
Occupied schools and public buildings — holiday-window and out-of-hours scheduling, with procurement-ready compliance documentation on first request.
Live clinical environments demand dust suppression, noise management and spotless handover — our silica controls are built for exactly this work.
Night works and staged cuts around trading hours — clean, quiet, and off site before the doors open.
Slab sawing, machine-base cuts and services penetrations in operating facilities — planned around production, not against it.
Road sawing, kerb and slab packages on mid-tier civil works across metro Melbourne.
Services contractor? Plumbers, sparkies, mechanical and fire crews run on our trade account — priority scheduling for high-frequency coring.
Every case study lists exactly what was cut, with what, under which constraints - because that's how estimators compare suppliers.
If cutting and coring is a weekly need, stop quoting from scratch. An MCC trade account puts your jobs at the front of the board.
Tell us your trade and typical monthly volume — we'll come back same day with how an account would work for your crew.
Ask About a Trade Account
When project deadlines are tight and accuracy is non-negotiable, Melbourne’s leading contractors rely on us. We deliver high-precision concrete cutting solutions engineered for commercial, industrial, and infrastructure builds—executing complex scope safely, cleanly, and on schedule.
Yes — for most commercial work we quote directly from drawings, markups or a scoped description. Send them before 2pm and you'll have your quote the same business day. If a site inspection is genuinely needed, we'll tell you up front and book it fast.
SWMS, Silica Risk Control Plan (SRCP), insurance certificates and operator licences — supplied as a single pack before mobilisation. If your builder uses a compliance platform, we'll upload directly.
Wet-cutting with slurry containment and wet-vac recovery as standard on indoor and occupied-site work. Dust suppression is engineered into the method statement, not improvised on the day.
Yes — night works, weekends and staged cuts around trading hours or occupied floors are routine for fit-out and refurbishment programs. Tell us the constraints and we'll build the method around them.
Programs move — we get it. Give us the earliest notice you can and we'll re-lock your attendance window. Trade account holders get priority when the board reshuffles.
All of metro Melbourne. For multi-site packages or regional work, ask — we'll tell you straight whether we can service it properly.
Scope in by 2pm, quote back same business day. Prefer to talk it through? The commercial line goes to someone who can price your job, not a call centre.
COMMERCIAL LINE 0478 817 718MON–SAT · METRO MELBOURNE
EMAIL PLANS TO: INFO@MELBOURNECONCRETECUTTERS.COM.AU
Submitted before 2pm? Your quote comes back today. After 2pm, first thing tomorrow.
